How to Connect to Qi Resonance™ Power Kit (Wired)Updated 12 days ago

PART I: REQUIRED ITEMS 

• Qi Resonance Bed
• Resonant Console
• Mobile Device (For Webapp User)
• Qi Resonance Power Kit
• Aux to RCA Cable
• 5-pin XLR to RCA Cable
• 2 x Banana Plugs

PART II: SETUP INSTRUCTIONS (BT)

1a. Connecting the Resonant Console to the Qi Resonance Power Kit

1. Open the Resonant Console App on your Console.
2. Select the Luck Boost album and press Play.
3. Turn the Console’s Volume to Maximum, you should be able to hear its sounds.
4. Plug the power cable into the Qi Resonance Power Kit and turn it on.
5. Set the volume of the treble and bass knobs to “0” or far left
6. Set main volume of the  Qi Resonance Power Kit to 40%.’

1b. Alternatively. Connecting your mobile device to the Qi Resonance Power Kit.

1. Open your mobile web browser and go to members.qicoil.com
2. Log in to your account.
3. Select the Luck Boost album and press Play.
4. Turn the mobile’s Volume to Maximum, you should be able to hear its sounds.
5. Plug the power cable into the Qi Resonance Power Kit and turn it on.
6. Set the volume of the treble and bass knobs to “0” or far left
7. Set main volume of the  Qi Resonance Power Kit to 40%.

2. Switching to Bluetooth Mode

A: Check the power light indicator on the power kit:

• If the light is green, it is in auxiliary mode.

B: Short press the Volume Button to switch to Bluetooth mode.

• If the light is blue and blinking, it is in Bluetooth mode and is not connected to a device.

1. Go to your Console’s Bluetooth settings and pair with “Qi Resonance Bed”.

3. Connecting the Qi Resonance Bed to the Qi Resonance Power Kit

A. Connect the 5-pin – XLR Connector to the mount located at the head of the bed.

B.  Connect the RCA end to the banana plugs:

• Plug the RED audio jack’s banana plug into the Sub Binding Post.
• Plug the BLACK audio jack’s banana plug into the Main Output Binding Post next to the sub.

4. Testing the Qi Resonance Bed

1. Play the Luck Boost frequency – Your bed will play the sound and will occasionally vibrate.
2. Alternatively, you can play the Magnet Testing frequency – Your bed will vibrate.

If the bed plays the sound and vibrates, your Qi Resonance Bed is working properly.

Important Notes:

• ⚠️ Treble/Bass 

Max Volume: 50%

• Lower frequencies will create stronger vibrations than higher frequencies.

Troubleshooting: Still Not Working?

1. Make sure that the Console/Mobile Device is turned on and connected to the power kit via Bluetooth or RCA cable.
2. Make sure the volume is turned up on the power kit and console.
3. Make sure all cables are securely connected
4. Ensure that test frequency is playing 
5. Repeat Setup steps

If issues persist, contact our support team at [email protected]