Qi Life Store logo
Qi Life Store logo

All articles

How to Connect Your Aura Coil to Your Power System (K1200 Amplifier)Updated 2 years ago

Part 1: Connect Aura Coil to Amplifier

1a Connect the Power Cable to the Amplifier and to a power outlet.

1b Connect Aura Coil’s Cable to Output Channel A at the back of the amplifier.

Part 2: Connecting Resonant Console to Amplifier

    Step 2a. Open the Resonant Console app on your tablet

Step 2b Increase the Console’s Volume to Maximum and play Testing Frequency. You should be able to hear it play a sound.

    Step 2c. Connect the XLR Cable to the Console headphone port.

    Step 2d. Connect the other end of the cable to the Input Channels at the back of the amplifier. 

Part 3: Check Amplifier for signal

    Step 3a. Turn Volume of the amp to Zero (all the way to the left)

    Step 3b. Switch the Power ON on the amplifier 

Step 3c. Check that the power light indicator is on

    Step 3d. Turn up the volume on the channel to 75% 

Step 3e. Check for light activity on the channel 

Part 4: Test Aura Coil for magnetic field

Step 4a: Hold the small MAGNET JAR close to the Resonant Wand to test for magnet movement.

Step 4b hold the Gold magnet near the center of AC to feel the vibrations in your hand

Once the magnet moves then your Resonant Wand is working properly.


Make sure the testing frequency is playing during the test, it is only 1 minute long, so just play it again when it stops.

For normal operation, do not turn the volume knob pass the 3 o’clock position (75%) to avoid overheating.

Lower frequencies will vibrate the magnet more than higher frequencies.  The vibration of the magnet is mainly for testing purposes only.

Still Not Working? 

Repeat the steps above and make sure cables are properly connected, volumes are turned up and amplifier and console power is turned on, and test frequency is playing.

Magnet Not Moving?

Watch this Troubleshooting Guide

Was this article helpful?