How to Connect Your Qi Coil and Speaker at the Same Time with Your Console and Wireless Power KitUpdated 2 years ago
Connect wireless mobile power kit to splitter audio jack
Connect one end of the splitter to the Speaker. (Line In Port)
Connect the other end of the splitter to Qi coil.
Turn your Wireless Powerkit Volume clockwise to Power ON. Turn knob clockwise to full volume.
Turn on the speaker by pressing the ON/OFF button.
Enable wired connection by turning the switch from BTH to AUX.
Open the Qi Coil App.
Play the testing frequency.
Turn up the volume on your speaker to maximum. (Rotate clockwise gesture on your DOSS Speaker)
Hold the gold magnet and get it close to the Qi Coil to test for vibrations.
Alternatively. Hold the small magnet in the plastic jar close to the Qi Coil to test for magnet movement.
Test if the speaker is working. Play "Remove Negative Energy" frequency on the app
You should be able to hear sounds coming from the speaker.
Qi Coil not working? Check mobile power kit is charged, or connect it to a USB port with the USB cable. Replay the testing frequency, or try "Life Force 50%" frequency on the app.
Speaker not working? Check if the speaker is fully charged or connected properly in the splitter and mobile power kit.
Important! Most people don't need to turn the mobile power kits to 100% volume during normal operation. 50% volume is adequate for most people.
Once the magnet test is successful, your Qi Coil system is ready to!
Note: Not all frequencies will move the magnet, only the TEST frequency and some lower frequencies will move the magnet. The Qi Coils are still working even if you don't feel/see the magnet move for some (higher) frequencies.
Play your chosen frequency and start experiencing qi energy!
Magnet Not Moving?
Watch this Troubleshooting Guide