Qi Life Store logo
Qi Life Store logo

All articles

How to Connect Your Qi Coil Max with Resonant Power Kit and Console via BluetoothUpdated 2 years ago

Part 1: Connect Qicoil Max to Resonant Power Kit

  1. Connect Qi Coil Max to Resonant Power Kit with an auxiliary cable.

  2. Connect the other end of the cable to the Banana Plugs

  3. Plug the Red Audio Jack into the red post and the black Audio jack into the black post.

  4. Connect the Power Cable to the Amplifier and to a power outlet.

  5. Turn your Wireless Powerkit ON, and press the “Power” button.(Red Light Indicator should light up)

Part 2: Connecting Resonant Console to Resonant Power Kit

  1. Pair with your console device by going to Settings-> Bluetooth then select “Resonant System” (The light indicator should turn from Red to Blue).

  2. Open the Resonant Console app

  3. Play the testing frequency

  4. Turn up the volume on your Console to maximum

  5. Turn up the volume on Power Kit to maximum

Part 3: Test Qi Coil Max for magnetic field

Step 3a: Hold the Gold Magnet close to the Qi Coil Max to test for magnet movement.

Step 3b hold the small cylinder magnet near the wand to feel the vibrations in your hand


Not working? Check resonant power kit is plugged in, or connect it to an RCA cable.

Replay the testing frequency, or try "Life Force 50%" frequency on the app

Important! Most people don't need to turn the Resonant power kits to 100% volume during normal operation.  75% volume is adequate for most people.


Once the magnet test is successful, your Qi Coil system is ready to go!


Note: Not all frequencies will move the magnet, only the TEST frequency and some lower frequencies will move the magnet.  The Qi Coils are still working even if you don't feel/see the magnet move for some (higher) frequencies.


Play your chosen frequency and start experiencing qi energy!




Magnet Not Moving?

Watch this Troubleshooting Guide


Was this article helpful?
Yes
No