How to Connect Your Qi Coil to Your Console and Wireless Power Kit (WIRED)Updated a year ago

1. Connect wireless mobile power kit to Qi Coil

2. Connect Wireless Mobile Power Kit to Console

3. Turn your Wireless Powerkit Volume clockwise to Power ON.

4. Enable wired connection by turning the switch from BTH to AUX.

5. Open the Resonant Console App

6. Play the testing frequency

7. Turn up the volume on your device to maximum

8. Turn on the mobile power kit volume to maximum

9. Hold the gold magnet and get it close to the Qi Coil to test for vibrations. 

10. Alternatively. Hold the small magnet in the plastic jar close to the Qi Coil to test for magnet movement.

Not working? Check mobile power kit is charged, or connect it to a USB port with the USB cable

Replay the testing frequency, or try "Life Force 50%" frequency on the app

Important! Most people don't need to turn the mobile power kits to 100% volume during normal operation.  50% volume is adequate for most people.

Once the magnet test is successful, your Qi Coil system is ready to!

Note: Not all frequencies will move the magnet, only the TEST frequency and some lower frequencies will move the magnet.  The Qi Coils are still working even if you don't feel/see the magnet move for some (higher) frequencies.

Play your chosen frequency and start experiencing qi energy!

Magnet Not Moving?

Watch this Troubleshooting Guide