Qi Life Store logo
Qi Life Store logo

All articles

How to Connect Your Resonant Console to Qi Coil™ with Higher Power Kit 2Updated 2 years ago

  1. Connect Wireless Higher Power Kit to Qi Coil (Channel-Port)

    1. Use the Auxiliary cable and connect one and on one of the channels at the back of the power kit. Make sure to leave a bit of space between the port and the jack.

    2. Connect the other on your Qi Coil Max.

  2. Turn your Wireless Powerkit Volume Switch Upward to Power ON.(Red Light Indicator should light up)

  3. Pair with your console device by going to Settings-> Bluetooth then select “Bluetooth Audio” (Blue Light Indicator in BT should light up).

  4. Open the Resonant Console app

  5. Play the testing frequency

  6. Turn up the volume on your Console to maximum

  7. Turn up the volume on Power Kit to maximum

  8. Hold the small magnet in the plastic jar close to the Qi Coil Max to test for magnet movement

  9. Not working? Check power kit Cables are connected properly. Try losing the cable connection a bit or pushing it inward more. You can also check if the bluetooth is successfully connected to the right bluetooth audio media and if no other bluetooth media is connected to your console.

  10. Replay the testing frequency, or try "life force mid" frequency on the app

Important! Most people don't need to turn the mobile power kits to 100% volume during normal operation. 50% volume is adequate for most people.

Once the magnet test is successful, your Qi Coil system is ready to go!

Note: Not all frequencies will move the magnet, only the TEST frequency and some lower frequencies will move the magnet.  The Qi Coils are still working even if you don't feel/see the magnet move for some (higher) frequencies.

Play your chosen frequency and start experiencing qi energy!

Magnet Not Moving?

Watch this Troubleshooting Guide

Was this article helpful?